University of Virginia
M. C. Gupta, B. Li, S. Gadag, and K. C. Chou, “Laser micromachining for fatigue and fracture mechanics applications,”
Optics and Lasers in Engineering, Volume: 48 Issue: 4 Pages: 441-447, 2010.
A. Kumar , M. Sapp, J. Vincelli and M. C. Gupta, “A study on laser cleaning and pulsed gas tungsten arc welding of Ti-3Al-2.5V alloy tubes,”
Journal of Materials Processing Technology, Volume: 210 Issue: 1 Pages: 64-71, 2010
C. N. Sun, T. Baldridge and M. C. Gupta, “Fabrication of ZrB2-Zr Cermet Using Laser Sintering Technique,”
Materials Letters, Volume: 63 Issue: 28 Pages: 2529-2531 Published: NOV 30 2009.
V. Iyengar and M.C. Gupta, “Laser Assited Doping for Photovoltaic Applications,”
Journal of Laser Micro-engineering, Volume: 4 Issue: 2 Pages: 89-94 Published: AUG 2009.
A. Kumar and M. C. Gupta, “Surface preparation of Ti-3Al-2.5V alloy tubes for welding using a fiber laser,”
Optics and Lasers in Engineering Volume: 47 Issue: 11 Pages: 1259-1265 Published: NOV 2009.
V. R. Koppolu, M. C. Gupta, W. Bagienski, Y. Shen, “H.C. Dorn, H. W. Gibson, “Organic solar cells with a blend of two solution processable electron acceptors, C60(CN)2 and PCBM,” Source:
Proceedings of the 2009 34th IEEE Photovoltaic Specialists Conference (PVSC 2009), p 6 pp., 2009.
A. Kumar and M. C. Gupta, “Laser Machining of Micro-notches for Fatigue Life,”
Optics and Lasers in Engineering, Volume 48, Issue 6, June 2010, Pages 690-697.
B. K. Nayak and M. C. Gupta, "Self-organized Micro/Nano Structures in Metal Surfaces by Ultrafast Laser Irradiation,"
Optics and Lasers in Engineering, 2010 (accepted for publication)
University of Michigan
G.P. Dinda a,b,*, A.K. Dasgupta a, J. Mazumder b “Laser Aided Direct Metal Deposition of Inconel 625 Superalloy:Microstructural Evolution and Thermal Stability,”
Materials Science & Engineering A, vol. 509, No.1-2, pp. 98-104, 2009.
Dinda Guru P, Joonghan Shin, Jyoti Mazumder, “Pulsed laser deposition of hydroxyapatite thin films on Ti-6Al-4V: effect of heat treatment on structure and properties,”
Acta Biomaterilia, Jun 5(5), pp1831-1830, January 2009.
Dutta*, Baskar, Singh, V. Natu, H. Choi, J., J. Mazumder, “Direct Metal Deposition,”
Advanced Materials and Processes, pp. 29-32 March 2009.
He, X; Yu, G., J. Mazumder, “Temperature and Composition Profile During Double-track Laser Cladding of H13 Tool Steel,”
Journal of Physics D-Applied Physics, Vol. 43, Issue 1, Article Number 015502, 2010.
Sun, G.F., Liu, C.S., Song, L.J., J. Mazumder, “Microstructure and Wear Behavior of Laser-Aided Direct Metal Deposited Co-285 and Co-285 + WC Coatings,”
Metallurgical and Materials Transactions A, 14th April, 2010 (on Line publication).
Mazumder, J; “Lasers in Aerospace Industry Manufacturing,” a chapter in
Aerospace Engineering Handbook to be published by John Wiley and co.
Southern Methodist University
Sarrafi, R. and Kovacevic, R., “Cathodic Cleaning of Oxides from Aluminum Surfaces by Variable-Polarity Arc,”
Welding Journal, January 2010.
Kong, F. and Kovacevic, R., “3D Finite Element Modeling of the Thermally Induced Residual Stress in the Hybrid Laser/Arc Welding of Lap Joint,”
Journal of Materials Processing Technology, 210(2010) 941-950, on line: DOI:10.1016/j.jmatprotec.2010.02.006.
Sarrafi, R., Lin, D., and Kovacevic, R., “Real-time Observation of Cathodic Cleaning during Variable-polarity Gas Tungsten Arc Welding of Aluminum Alloys,”
Proceedings of Institution of Mechanical Engineers, Vol. 223, Part B, Journal of Engineering Manufacture, pp. DOI: 10.1243/09544054JEM1355.
Huang, W. and Kovacevic, R., “Feasibility Study of Using Acoustic Signal for On-line Monitoring the Depth of Weld in Laser Welding of High-strength Steel,” Proceedings of
the Institution of Mechanical Engineers, Part B,
Journal of Engineering Manufacture, Vol. 223, pp. 343-361, 2009.
Huang, W. and Kovacevic, R., “A Neural Network and Multiple Regression Method for the Characterization of the Depth of Weld in Laser Welding based on Acoustic Signatures,”
Journal of Intelligent Manufacturing,
Springer, published on-line May 12, 2009, DOI 10.1007s10845-009-0267-9.
Yang, Sh. and Kovacevic, R., “Welding of Galvanized Steels in a Gap-free Lap Joint Configuration,”
Welding Journal, August 2009, Vol. 88, pp. 168-178.
Foroozmehr, E. and Kovacevic, R., “Thermo-Kinetic Modeling of Phase Transformation in Laser Powder Deposition,”
Metallurgical and Materials Transactions A, published on June 24, 2009, DOI: 10.1007/s11661-009-9870-9.
Kong, F., Santhanakrishnan, S., Lin, D., and Kovacevic, R., “Thermal-microstructure Modeling of Temperature Field and Grain Growth of a Dual-Phase Steel DP980 in Direct Diode Laser Heat Treatment,”
Journal of Materials Processing Technology, 209 (2009), pp. 5996-6003 or online: doi:10.1016/j.matprotec.2009.07.020.
Foroozmehr, E., Lin, D., and Kovacevic, R., “Application of Vibration in the Laser Powder Deposition Process,”
Journal of Manufacturing Processes, 11(2009) pp. 38-44.
Yang, Sh. and Kovacevic, R., “Laser Welding of Galvanized Dual-Phase 980 Steel Assisted by the GTAW Preheating in a gap-free Lap Joint Configuration, ”
Journal of Laser Applications, Vol. 21, No. 3, 2009.
University of Illinois
M. Jarworski, N.B. Morley, and D. N. Ruzic, “Thermocapillary and Thermoelectric Effects in Liquid Lithium Plasma Facing Components,”
Journal of Nuclear Materials, 390–391, pp. 1055-1058 (2009).
H. Qiu, S. N. Srivastava, K. C. Thompson, M. J. Neumann, D. N. Ruzic “The Effectiveness of Mo-Au Gibbsian Segregating (GS) Alloys and The Surface Removal Effect on the GS Performance for EUV Collector Optics,”
Optics Engineering, 48, 056501 (2009).
J. Sporre, C. H. Castano, R. Raju, and D. N. Ruzic, “Ionic Debris Measurement of Three Extreme Ultraviolet Sources,"
Journal of Applied Physics, 106, 4 (2009).
M. Racic, K. Ibano, R. Raju and D.N. Ruzic, “Physical Erosion Studies of Plain and Lithiated Graphite,”
Journal of Nuclear Materials, 390-391, pp. 1043-1047 (2009).
K. Ibano, V. Surla, D. Ruzic, “Sputtering and Thermal Evaporation studies of Lithiated Graphite,”
IEEE Transactions of Plasma Science, 2009.
V. Surla, M. A. Jaworski, T. K. Gray, W. Xu, M. Neumann, D.N. Ruzic, “ Lithium Research as a Plasma Facing Component Material at University of Illinois,”
Thin Solid Films, 2010.
L. Meng, R. Raju, R. Flauta, H. Shin, and D.N. Ruzic, “In situ Plasma Diagnostics Study of a Commercial High-Power Hollow Cathode Magnetron Deposition Tool,”
Journal of Vacuum Science and Technology, A 28, 1, (2010).
M. A. Jaworski, T. K. Gray, M. Antonelli, J. J. Kim, C.Y. Lau, M. B. Lee, M. J. Neumann, W. Xu, and D. N. Ruzic, “Thermoelectric Magnetohydrodynamic Stirring of Liquid Metals,”
Physics Review Letters, 104, 094503 (2010).
